Macrosystem Bogart SE Ver.2 User manual Manual do Utilizador descarregar pdf (Página 51)

100

Bogart SE 2 user manual

In the right area of the screen, you can see the function “Italic”.

You can activate it by selecting the empty box next to it.

The button “Smooth” is use to apply a slightly smeared look

to the text. It also may help to weaken any unwanted artefacts

resulting from video compression.

Underneath, you can see the “3D” option. The strength of the

three-dimensional effect can be set with even values between 0

and 20 by moving the slider. The effect makes the letter look as

if they had a certain depth. If you use higher values, make sure

to set a character space of around 120% so that the 3D effect

does not interfere with the letters themselves.

The “direction” can be set to four different possibilities. The ar-

row pointing towards the left top direction is recommended.

The structure of the effect can be set using the “Color/Pattern”

button. It is recommended to use a tone similar to the text color,

yet with brightness between this and the background color’s.

Below left, in the "Style" screen, you can see the “Archives”

button. The Archives allow you to save the styles you have

created. You will also ﬁnd some examples of styles in the

archives. The Style screen can be closed by pressing the “OK”

button (meaning that you conﬁrm the settings made) or by

pressing “Cancel”.

• Clicking in the text entry operation panel on the "Line” but-

ton opens a window in which the functions "Character width",

"Character space", "Alignment", "Line space" and "Delete

active line" are listed.

You can see that the settings of the buttons with percent val-

ues lie between 50% and 200%, whereby 100% corresponds

to the default setting.

In the Enter/edit text screen, click anywhere in the line of text

to be edited. Then select the button "Line” and under "Charac-

ter width" enter the desired percent. Click on "OK" to observe

the result. The letters have become wider (> 100%) or narrower

(< 100%), depending on the percent given, and the entire line

has become either longer or shorter.

The individual words in a line cannot be formatted separately.

The settings apply only to the entire line.

The function "Character space" increases or decreases the

space between the letters. In the Enter/edit text screen, click

anywhere in the line of text to be edited and select the button

"Line”. Use the "Character space" slider to enter the desired

percent of the distance.

The line is stretched (> 100%) or narrowed (< 100%), depend-

ing on the percent value given.

The individual words in a line cannot be formatted separately.

The settings apply only to the entire line.

Under the selection button "Alignment" you can specify wheth-

er the line should be formatted "left", "centered" or "right".

With the function "Line space" you can specify the distance

between the selected line and the line below it. In the Enter/

edit text screen, click on the line that lies above the line to be

changed. Now select "Line” and under "Line space" change

the default value (=100%) to another value.

If your percent number is smaller, then the line below moves

closer to the selected line. If your percent number is larger,

then the line slides farther away toward the bottom from the

selected line. The lines below the moved line are moved along

with it, but keep their respective distances.

You can also make several settings together in the "Line"

window before clicking on "OK". Note that the settings always

apply to the line selected beforehand!

The percent values you have set are retained. You can view

the settings and changes for the line you have selected by

activating the "Line" window. Here you can also modify the

percent values.

(If you have made changes but still see the default values of

100% in the "Line" screen, then you have selected the wrong

line before clicking on "Line".)

Clicking on "Delete active line" causes the line containing the

position marker to be deleted. The window disappears.

The switch Import (CD symbol with an arrow) allows you

to import texts written on a computer for titling (for instance,

a text from an email with a customer's preferred credits text).

This saves work and prevents typos. The system supports the

standard text formats `ASCII` and `UNICODE`.

When saving a text in a word processing package, make sure

to save it as such. In order to make sure that even unusual

characters are imported correctly (such as the Euro symbol),

we recommend that you use the UNICODE format too.

If you wish to import a PC text, note that only the pure text

is actually loaded, not the settings such as font type, size,

style etc. Such settings (like the text format) must be made in

Bogart SE after importing.

Before starting, make sure that you have inserted the correct

medium (CD/DVD) or connected the right device (USB stick,

Fire wire hard-drive).

Click onto the symbol button. Now you can select the source

for the text you wish to import. Choose either the CD/DVD, the

external drive or the USB stick (for this, you require the Card

Drive software). Following this, the texts on the source medium

will be displayed and you can now choose the text for the

import.

With the buttons on the left in the menu "Text" you can reduce

the task bar to these buttons or move it to the opposite screen

edge. With the "TE" button you return to the titler menu.

(3) Clicking on the button "Boxes" calls up an additional task

bar, with which you can create and edit text boxes.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 99 100

Comentários a estes Manuais

Sem comentários

Macrosystem Bogart SE Ver.2 User manual Manual do Utilizador Página 51

Comentários a estes Manuais

Manuais e produtos relacionados com Software Macrosystem Bogart SE Ver.2 User manual